AEA Terminator Air Rifle

Construction

The AEA Terminator air gun is 110 cm long, but what is worth noting is that the rear cartridge, which also serves as a tank, can be unscrewed without releasing the pressure, thanks to a special valve, and screwed back in and you can start shooting immediately. After unscrewing the rear cartridge of the stock, the length is reduced to 80.5 cm, so our rifle is shortened by almost 30 cm. The weight of the carbine is 4.3 kg.

Barrel

The barrel is 20 inches (50.8 cm) long and is embedded in a barrel cover with special partitions designed to silence shots. At the end of the barrel cover, it is possible to screw on a special adapter from DonnyFL, to which we can additionally attach a silencer with a 1/2 UNF thread. This barrel is ideally suited for shooting pellets and SLUG bullets.

Cartouche

The carabiner is equipped with two tanks with a total capacity of 700cc and a maximum working pressure of 250 Bar. The rear cartridge is screwed on and serves as a tank. It can be screwed in and out even if there is pressure in the carabiner.

The set includes a charging tip with a quick connector with a diameter of 7 mm.

Rail

The AEA Terminator model is equipped with a 22mm Weaver rail, thanks to which we can mount a scope or a collimator that will enable quick, accurate shots. The carabiner also has a level on the rail that will help you set the carabiner in the right position.

Magazine

Magazines for AEA Terminator rifles have been designed to be able to shoot quickly and accurately with as many shots as possible from one magazine. They are self-indexing so that the entire semi-automatic system works flawlessly. Depending on the caliber, we have different magazine capacities.

• 7.62mm (.30) - 11 slots
• 9mm (.35) - 10 slots

Included:

• AEA Terminator
• User manual
• Receipt/Invoice
• Charging tip
• Two Magazines
• Removable transfer port
• Declaration of kinetic energy not exceeding 16J
• 24-month warranty

Product details: