AEA AIRGUN Challenger Pro Gen 3 Eeagle-Wolf-Ronin Bundle

The best bundle with the best price.

OUR NEW BUNDLE AEA AIRGUN Challanger PRO Gen3 - Riflescope T-Eagle ZS 6-24x50FFP MRAD - Silincer Ronin with Adapter A100 - BIPOD V9 PRO

Challenger Pro GEN 3 is a new product that has gained significant popularity in the American market. Its incredible accuracy, power, compactness, and good price make this carbine ideal for anyone who wants to shoot long distances or start their shooting adventure.

Challenger Pro Gen 3 is equipped with a pressure regulator that can be adjusted from the outside using an Allen key.

Construction

AEA air rifles are famous for their high-quality workmanship. Individual parts are made on CNC machines. All parts fit together very well. The air gun is very compact and light. Its total length is only 93 cm, and after folding the stock it is only less than 68 cm, which means that the air gun can be hidden in a backpack. The weight of the air gun is about 3.5 kg, so we can easily shoot it with a free hand or with a support. The telescopic stock folds to the side and is made of aluminum. We can extend and hide it, and raise and lower the sidebar, thanks to which we can perfectly adjust it to our height to make shooting as comfortable as possible.

Rail

The Challenger Pro air rifle is equipped with a 22 mm standard weaver rail, thanks to which we can mount a scope or a kolimator that will enable quick, accurate shots. Additionally, the lower rail allows the installation of a bipod, which will make shooting from a sitting or lying position more enjoyable.

Cartouche and Regulator

The carbine is equipped with a large cylinder with a capacity of 330cc and a maximum working pressure of 310 Bar and two pressure gauges, and additionally has a factory externally controlled regulator with POWER PLENUM with a capacity of 120cc, which makes all shots repeatable and with the same muzzle velocity.

The two pressure gauges installed in the cartridge are pressure gauges showing the pressure in the cartridge and on the regulator.

The first pressure gauge, at the bottom of the cartridge, shows the pressure on the cartridge (maximum pressure 310Bar)

The second pressure gauge, next to the cartridge, next to the cartridge filling socket, is responsible for the pressure indication on the regulator and is set from 80 to 170 Bar. As the pressure on the regulator increases, the muzzle velocity and energy of the air gun increase.

The pressure regulator, which is controlled externally, allows us to change the pressure without the need to unscrew the carabiner or release the pressure from the cartridge.

The Allen screw, which is located under the cartridge and the pressure gauge above it, is a screw that allows you to change the pressure on the regulator.

1. Increasing the pressure on the regulator is done by slowly turning the screw from left to right, you will see increasing pressure on the pressure gauge from the regulator and a quiet hissing sound.

2. 1. Reducing the pressure on the regulator is done by slowly turning the screw from right to left. Please remember that we will not see the readings on the pressure gauge immediately!!! After lowering the pressure, you need to shoot "dry" a few times (without pellets) so that our regulator and the O-rings inside the regulator are in place. After a few shots, you will see a reduced value on the pressure gauge, if it is insufficient, repeat the operation.

It is very important that when lowering and increasing the pressure on the regulator, you do it slowly and do not turn the screw too aggressively.

Number of shots on one tank:

• 5.5mm (.22) - 50+ shots
• 6.35mm (.25) - 45 shots
• 7.62mm (.30) - 35 shots
• 9mm (.35) - 25 shots

Muzzle speed adjustment

Challenger Pro is equipped with muzzle velocity adjustments. The muzzle velocity adjustment wheel is located near the magazine, and we can very easily replace it with another one with a larger or smaller through-bore diameter from the transfer port, or by turning the wheel, we can change the muzzle velocity parameters.

Olso we can adjustment muzzle speed use Hammer spring. if we folding our Stock, we will see scrow for allen key and we can regulate hammer spring using the key.

Barrel

Barrel 24 inches (61 cm) long and thread pitch:

• 1:17.7 for 5.5mm and 6.35mm caliber
• 1:16 for 7.62mm caliber

Makes AEA rifles great at shooting slug bullets. The 14x1 thread at the outlet allows you to screw on an additional silencer, or you can screw on an adapter A99 from DONNY FL and you will be able to use 1/2 UNF silencers, or use moderator Ronin DonnyFl with Special adapter for thread 14x1.

Magazine

The magazines are made very carefully so as not to damage the pellets or pellets during indexing. The magazine capacity varies depending on the caliber:

• 5.5mm - 12 slots
• 6.35mm -10 slots
• 7.62mm - 9 slots
• 9mm - 8 slots

Included:

• AEA Challenger Pro Gen 3
• Transfer port FullPower
• Two magazines
• Charging tip
• Declaration of energy not exceeding 16J
• Warranty Card
• Receipt or VAT invoice
• 24 months warranty

Product details: