- Shop with ease; our checkout guarantees security.
- Professional assistance and expert advice
- Worldwide shipping: discreet & trackable.
- Out-of-Stock
High-Pressure Compressor for PCP Rifles and Cylinders, 2.2 kW
This compressor is highly efficient, featuring a dual circuit system that allows you to fill a small rifle tank in just a few minutes.
You won't need to struggle with a manual pump, saving your time and energy.
Operation and Maintenance Instructions:
- Water Filling: Do not use the pump without filling it with water.
- Oil Level: Ensure the oil level does not drop below the red mark. To check or change the oil, the pump must be on a horizontal surface. The compressor must be stopped and disconnected from the power supply.
- Startup: The compressor starts at zero pressure. If you need to take a break during operation, you must unscrew the valve to release the pressure before restarting the compressor.
- Temperature: During use, ensure the temperature does not exceed +65°C.
- Modifications: Do not modify the product. Repairs and maintenance should be carried out only by a specialized service center.
- Electrical Safety: Ensure the plug connector can handle currents greater than 8A and is not overloaded to prevent fire hazards for safe operation and to avoid product damage.
- Avoid Burns: Do not touch the product or its parts immediately after use to avoid thermal burns.
- Avoid Overloading: Do not leave the device in an overloaded state. If necessary, take breaks to prevent motor overload and device failure.
- Large Volumes: For large tank volumes, the compressor may experience overload every 30 minutes after coolant replacement. Carefully monitor the cylinder temperature.
Description and Features:
- The device is equipped with a high-pressure hose with a reusable filter.
- The set includes a water pump.
- The product can work simultaneously with another compressor to speed up the process, making it suitable not only for dive tanks but also for cars, trucks, etc.
Specifications:
- Operating Voltage: 220 volts
- Power Consumption: 2.2 kW
- Product Weight: 30 kg
- Maximum Pressure: 300 bar
- Flow Rate: 50 l/min
- Noise Level: 78 dB
- Dimensions: 530 x 400 x 480 mm
Product details:
- Weight: 28 kg
- Power Supply: Electric
- Application: Filling PCP Tanks
- Model: TXED011

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent