Adjustable 34mm Tube Scope Mount IPS-34 INFINITY EagleVisionCam

Allows for mounting a scope with vertical movement along the rail.

Mounting
The mount can be locked in various positions using two screws. It can be used as a low-profile mount or adjusted to a high profile if the sight is too close to the barrel or rifle cover. The mount is ideal for rifles with non-standard rail positions.

By keeping the front mount in the lowest position and raising the rear mount to the highest point, you can zero the rifle much further than standard mounts allow, without using turret clicks, thus keeping the optical center of the scope intact (ideal for long-range shooting).

Notes:
Accessories are not included and can be purchased separately. Designed for PCP and spring air rifles. Screws can only be removed when the mount is in the fully open position; otherwise, the mount may be damaged.

Included:

• 2x mounts
• 2x Allen keys (different sizes)
• 4x screws
• 1x large screw
• Ring protective material
• Waterproof case

Product Details:

• Rail: 20 mm
• Weight (g): 81 each
• Overall Height [mm]: Adjustable from 68.25 mm to 77.75 mm
• Profile Height: 23 mm
• Adjustable Height: 9.5 mm
• Tube Diameter: 34 mm
• From Center of Ring to Bottom of Rail (Closed Position): 41 mm
• From Center of Ring to Bottom of Rail (Open Position): [Position not provided]